ACS723LLCTR-20AU-T 5V 20A 22.5us SOIC-8 Current Sensor Electronic Component

120 kHz Bandwidth, High-Voltage Isolation Current Sensor with Integrated Overcurrent Detection

1 FEATURES AND BENEFITS
▪Industry-leading noise performance with greatly improved bandwidth through proprietary amplifier and filter design techniques

▪ Small footprint package suitable for space-constrained applications
▪ 1 mΩ primary conductor resistance for low power loss ▪ High isolation voltage, suitable for line-powered applications
▪ User-adjustable Overcurrent Fault level
▪ Overcurrent Fault signal typically responds to an overcurrent condition in < 2 μs
▪Integrated shield virtually eliminates capacitive coupling from current conductor to die due to high dV/dt voltage transients
▪ Filter pin capacitor improves resolution in low bandwidth applications
▪ 3 to 5.5 V single supply operation ▪ Factory-trimmed sensitivity and quiescent output voltage
▪Chopper stabilization results in extremely stable quiescent output voltage
▪Ratiometric output from supply voltage

2 DESCRIPTION

The Allegro™ ACS710 current sensor provides economical and precise means for current sensing applications in industrial, commercial, and communications systems. The device is offered in a small footprint surface-mount package that allows easy implementation in customer applications.

The ACS710 consists of a precision linear Hall sensor integrated circuit with a copper conduction path located near the surface of the silicon die. Applied current flows through the copper conduction path, and the analog output voltage from the Hall sensor linearly tracks the magnetic field generated by the applied current. The accuracy of the ACS710 is maximized with this patented packaging configuration because the Hall element is situated in extremely close proximity to the current to be measured. High-level immunity to current conductor dV/dt and stray electric fields, offered by Allegro proprietary integrated shield technology, results in low ripple on the output and low offset drift in high-side, high-voltage applications.

The voltage on the Overcurrent Input (VOC pin) allows customers to define an overcurrent fault threshold for the device. When the current flowing through the copper conduction path (between the IP+ and IP– pins) exceeds this threshold, the open drain Overcurrent Fault pin will transition to a logic low state. Factory programming of the linear Hall sensor inside of the ACS710 results in exceptional accuracy in both analog and digital output signals. The internal resistance of the copper path used for current sensing is typically 1 mΩ, for low power loss. Also, the current conduction path is electrically isolated from the low-voltage

Specifications

Transportations & Payments


Frequently Asked Questions

1. Please confirm receipt of products if the items you received,and if the goods was damaged please

contact us immediately. send the photo to us that we can check and give you best solution

2. We only guarantee delivery in time but we couldn't control the express delivery time. Our related

sales person will be responsible to send the AWB for the delivered goods in the next workday.

you can check the AWB in the website which we send to you. For the AWByou also can call to the

local branch of the express company in your company.

Pre-sales service :

1. Our team design and make solutions based on different requirements from different customers.

2. We provide 24-hours service,and every message you quote inquiry will be replied within12 hours

ACS710KLATR-12CB-T 5V 11mA 4us Board Mount Current Sensors Electronic Component Images